• Canon Imageclass D320 Manual
• Canon Imageclass D320 Printer
• Canon D320 Reviews

Here are the original instructions: Open the right cover. Remove the cartridge from the machine. Remove the new cartridge from its protective bag.

Save the protective bag. You may need it later when you remove the cartridge from the machine. Rock the cartridge 5 or 6 times to distribute the toner evenly. Place the cartridge on a flat and stable surface. Grip the sealing tape tab and snap it in the direction as shown. Make sure that the tab itself is detached from the cartridge. While grasping the cartridge with one hand, firmly and slowly pull the sealing tape tab straight out with the other hand to remove the sealing tape completely.

Throw the tape away. To avoid breaking the tape, do not pull the tape out at an upward or downward angle. Hold the cartridge and position the arrow mark on the cartridge towards the inside of the machine shown below. Align the projections (A) on both sides of the cartridge to the guides (B) in the machine (location (1)) and gently slide the cartridge into the machine until the right cover slightly rises up (location (2)). The right cover moves simultaneously with the action of the cartridge. Do not push the cartridge farther than location (2). Doing so will result in catching your hand in the right cover.

Close the right cover and the cartridge will be set in place (location (3)). If the LCD displays [INSTALL CARTRIDGE], reset the machine by opening the right cover and then closing it. Try a hard reset of the printer then, in case the error message is merely sticking or a remnant of a previous status, that the hard reset might clear.: Turn the printer OFF, when it is on, by suddenly and sharply unplugging it from the power source.

Canon PC-D320 drivers will help to eliminate failures and correct errors in your device's operation. Download Canon PC-D320 drivers for different OS Windows versions (32 and 64 bit). After you have downloaded the archive with Canon PC-D320 driver, unpack the file in any folder and run it. Read and download Canon Fax Machine PC-D320 User's Manual online. Download free Canon user manuals, owners manuals, instructions, warranties and installation guides, etc. Brands Products New Manuals.

Also unplug it from the computer! Leave it that way for 10 minutes. Plug it back in. Turn it on if it didn't turn itself on. Wait for it to initialize. Try the printer again.

It is possible that a sensor switch (of the type that is pushed down or pushed aside when paper is present in the paper path) is jammed or fouled or otherwise indicating incorrectly. A search of the paper path for such a stuck switch (in the position that it would ordinarily occupy only if paper were passing through the paper path) is your last resort in a case like this, before either having the printer serviced, or replaced and recycled (or, if less than a year old, returned to Canon under their standard one-year warranty terms for all the printers they sell. Call 1-800-OK-CANON to start this process). As for recycling the printer, if you decide to get rid of it.is the page from which you can order the printer recycled.

Go to Printers and All-in-ones, then go to Laser printers, and select the ImageClass D320, then enter your serial number, etc. Hope this helps. Answered on Aug 23, 2011.

• Basic Guide Basic Guide Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference. • NOTE Copyright Copyright ©2003 by Canon, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon, Inc. • Laser Safety This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser product under the U.S.

Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the machine does not produce hazardous laser radiation. Since radiation emitted inside the fax is completely confined within protective housings, and external covers, the laser beam cannot escape from the machine during any phase of user operation. • If such changes or modifications should be made, you could be required to stop operation of the equipment. One Canon Plaza, Lake Success, NY 11042, U.S.A. Users in Canada • This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

• Contents Chapter 1: Introduction Customer Support.1-1 Important Safety Instructions.1-1 Main Components of the Machine.1-4 Operation Panel.1-6 Standby Display.1-7 Energy Saver Mode.1-8 Setting the Energy Saver Mode Manually.1-8 Restoring from the Energy Saver Mode.1-8 Chapter 2: Paper Handling Print Media Requirements.2-1 Printing Areas.2-2. • Chapter 8: Troubleshooting Clearing Jams.8-1 Removing Jammed Paper from Inside the Main Unit.8-1 Removing Jammed Paper from the ADF (Only for the imageCLASS D340 model).8-4 LCD Messages.8-5 Paper Feeding Problems.8-7 Copying Problems.8-8 Print Quality Problems.8-9 Printing Problems.8-11 General Problems.8-11 If You Cannot Solve the Problem.8-12. • Type Conventions Used in This Guide Please read the list below of symbols, terms, and abbreviations used in this guide.

• Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the machine safely, always pay attention to these warnings. • For live technical support, call 1-800-828-4040, Monday – Friday, 8 am – 8 pm EST (except holidays). 24-hour, 7 days/week automated support for troubleshooting issues on most current models, call 1-800-423-2366. CANADA Users – call for technical support 24 hours/day, 7 days/week at 1-800-OK-CANON.

Canon Imageclass D320 Manual

Support programs are subject to change without notice. • Legal Limitation on Usage of Your Product and the Use of Images Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as scanned, printed or otherwise reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability. • • Place the machine on a flat, stable, vibration-free surface that is strong enough to support its weight (approx. 35.2 lb./16.0 kg imageCLASS D340, 31.9 lb./14.5 kg imageCLASS D320).

• Make sure the area is free from dust. • Avoid poorly ventilated locations. • • Make sure the location is not affected by extreme temperature changes, and always stays between 59°F and 80.6°F (15°C and 27°C). • Make sure the relative humidity of the area is between 20% and 80%. • Keep the machine away from direct sunlight. • Handling • Do not drop paper clips, staples, or other metal objects inside the WARNING machine. Also do not spill water, liquid or inflammable substances inside the machine.

Canon Imageclass D320 Printer

If these items come into contact with high-voltage parts inside of the machine, it may result in a fire or electrical shock. If these items are dropped or spilled in the machine, unplug the power cord immediately with dry hands. Torrent telugu movies free download. • LEFT COVER Open it when you output paper face up or remove jammed paper. POWER CORD CONNECTOR USB INTERFACE CONNECTOR imageCLASS D320 LEFT COVER Open it when you output paper face up or remove jammed paper. POWER CORD CONNECTOR USB INTERFACE CONNECTOR DOCUMENT FEEDER TRAY Place documents for copying. • Right Side View imageCLASS D340 imageCLASS D320 PLATEN GLASS COVER Open it when you place documents on the platen glass for copying.

Canon D320 Reviews

PLATEN GLASS Place documents for copying. OUTPUT TRAY Outputs printed pages. RIGHT COVER Open it when you install the cartridge, or remove jammed paper. • Operation Panel This section describes keys used when making copies and setting the Additional Functions.

Enlarge/Reduce key Sets an enlargement or reduction ratio of the copy. Enlarge / Reduce Additional Functions Additional Functions key Customizes the way your machine operates. 4 (–), e (+) keys Scroll through the selections so you can see other settings.

• Standby Display The standby display is as follows: Copy Ratio Paper Size Exposure Copy Quantity Image Quality • When the machine is plugged in, the LCD displays PLEASE WAIT for a while, then the standby display NOTE appears. • Energy Saver Mode This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine automatically enters the energy saver mode. • The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 NOTE minutes. • Paper Handling Print Media Requirements For high-quality copies, we recommend using paper and transparencies recommended by Canon. Some types of paper available at office supply stores may not be suitable for this machine. If you have any questions about paper and transparencies, consult your dealer or Canon Customer Relations.

• The term “printing area” represents both the recommended area for optimum print quality and the entire area where the machine can technically print from your computer. Printing area (light shade): Canon recommends that you print within this area. Paper 13/64'. • Loading Paper This section describes how to load paper in the cassette and in the multi-purpose tray. • When loading paper, take care not to cut your hands on the edges of the paper. CAUTION • The paper in the multi-purpose tray is fed prior to the paper in the cassette. • Loading Envelopes in the Cassette • The recommended envelopes are COM10, MONARCH, DL, ISO-C5.

Using other envelopes may affect the quality of the copy image. IMPORTANT Arrange the stack of envelopes on a firm, clean surface, and press down firmly on the edges to make the folds crisp. • Loading Paper in the Multi-purpose Tray Use the multi-purpose tray when you want to copy or print on paper of a different type from that loaded in the cassette. You can load up to 10 sheets of letter-size (20-lb bond or 75 g/m type of compatible paper. • Loading an Envelope in the Multi-purpose Tray Use the multi-purpose tray when you want to copy or print an envelope one by one.

• The multi-purpose tray has priority over the cassette. NOTE Set the multi-purpose tray. Insert an envelope with the print side up (a flap should not be visible) and load it so that the left side (sender's address side) feeds first in the multi-purpose tray. • For high-quality copies, be sure to use the paper and transparencies recommended by Canon.

2-1) • When making copies of a small size document or thick paper, etc., the copy speed may be slightly slower than usual. • Selecting the Paper Output Area Face down paper output delivers paper with the printed side down. Face up paper output delivers paper with the printed side up. Select the output area depending on your purpose by opening or closing the left cover. Open the left cover for face up paper output or close the left cover for face down paper output. • Face Down Paper Output Area The paper is delivered with the printed side down on the output tray. Paper is stacked in printed order.

With left cover, closed. • Do not place the output paper back on the output tray. Tracing paper* etc.) – Book Size (W × L) imageCLASS D340 Max.: Letter size (8 (216 mm × 279 mm) imageCLASS D320 Max.: Legal size (8 (216 mm × 356 mm) Quantity 1 sheet Weight Max. 4.4 lb (2 kg) When copying a transparent document such as tracing paper or transparencies, place a plain piece of white paper behind the document. • Problem Documents • Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the platen glass or loading it into the ADF*. • Remove all fasteners (staples, paper clips, etc.) before loading the document into the ADF*. • Setting Up Documents For scanning, place your documents on the platen glass or load them into the ADF*.

Where you set up your documents depends on the size and type of documents you have. 3-1) * Only for the imageCLASS D340 model Open the platen glass cover. • Loading Documents in the ADF (Only for the imageCLASS D340 model) Make sure there is no document on the platen glass.

Fan the edges that will feed into the machine first, then tap the edges of multiple page documents on a flat surface to even the stack. • The Paper Path of the Automatic Document Feeder (Only for the imageCLASS D340 model) Scanning unit • When documents are set in the ADF, the scanning unit moves to the position shown in the figure above NOTE and it is fixed there.

When documents are not set in the ADF, the scanning unit moves to scan it. • Chapter 4 Making Copies Documents You Can Copy For information on the types of documents you can copy, their requirements, and details on setting up documents, → Chapter 3. Copying Documents Prepare the document and load it face up in the ADF* or place it face down on the platen glass.

• Canceling the Copy Job While Scanning Documents in the ADF (Only for the imageCLASS D340 model) Press Stop/Reset. STOP KEY PRESSED PRESS SET KEY After Scanning Documents Press Stop/Reset.

CANCEL COPYING?